RED TEK EasyWeld FAQ


Although it is best to clean the surface prior to welding, RED TEK® EasyWeld will weld through rust, paint and other contamination when it is necessary. Amperages should be increased slightly. When welding thin materials, use the lowest possible amperages and maintain a loose arc. RED TEK® EasyWeld may be used with a drag technique or with a gap.


Sizes Amperages Applications Tech Tip
3/32" 40-80 Spray Tanks Use contact drag welding
1/8" 70-100 Sheet Metal
5/32" 120-175 Galvanized Steel
    Pipe welding
Higher tensile strength of up to 90,000 psi
Elongation of 24%
AC/DC REVERSE
Tank welding
General fabrication
       
Jigs and fixtures