WELDING
 

RED TEK® EasyWeld™
801 EasyWeld 3/32"
802 EasyWeld 1/8"
803 EasyWeld 5/32"

Product Information  
Frequently Asked Questions  
Packaging Available  



RED TEK® EasyWeld is our fourth generation of high technology welding electrodes. RED TEK® EasyWeld provides maximum penetration and an extremely high tensile strength. Now you can weld extra strength into each job. EasyWeld has the most aggressive self cleaning action in the industry. No other rod can match the performance of new RED TEK® EasyWeld. You'll love RED TEK® EasyWeld.


DEFIES GRAVITY

No one likes that hot feeling of spatter dripping down their neck. Now molten metal stays up on the joint, not down on you. Overhead welding is easy with new RED TEK® EasyWeld.

SELF CLEANING

Most welders spend more time prepping the steel than welding. What happens if you don't have clean steel? The weld breaks. RED TEK® EasyWeld welds through rust, paint, and even manure.

WATER RESISTANT

RED TEK® EasyWeld is moisture resistant. No more costly waste from unusable damp rods.

BENDABLE

RED TEK® EasyWeld electrodes can be bent without the flux popping off.

INSTANT STRIKE and RESTRIKE

Save time and money by using the entire rod safely without flux deterioration.

SELF RELEASING SLAG

Throw away your chipping hammer. RED TEK® EasyWeld slag pops off with a flick of your finger.

PROCEDURE

Although it is best to clean the surface prior to welding, RED TEK® EasyWeld will weld through rust, paint and other contamination when it is necessary. Amperages should be increased slightly. When welding thin materials, use the lowest possible amperages and maintain a loose arc. RED TEK® EasyWeld may be used with a drag technique or with a gap.


Sizes Amperages Applications Tech Tip
3/32" 40-80 Spray Tanks Use contact drag welding
1/8" 70-100 Sheet Metal
5/32" 120-175 Galvanized Steel
    Pipe welding
Higher tensile strength of up to 90,000 psi
Elongation of 24%
AC/DC REVERSE
Tank welding
General fabrication
Jigs and fixtures